Beechcraft Bonanza &
Debonair (w / IO-470)

Kit Number- PL60298
Kit Number- PL60299
Kit Number- PL60308
Kit Number- PL60309
STC Number - SA1489GL
Aircraft TCDS Number - 3A15

Applicable Aircraft

35-33, 35-A33
35-B33, 35-C33, E33 F33

Engines

Continental IO-470-J, -K
Continental IO-470-K

Maximum Continuous

2600 RPM, 225 HP
2600 RPM, 225 HP

STC Kit Contents

1 Propeller
1 Satin Spinner Assembly
(Used on PL60298 and PL60299)
1 Polished Spinner Assembly
(Used on PL60308 and PL60309)
1 Installation Instruction
1 Flight Manual Supplement
PL60299 and PL60309 Also contains:
1 Governor

Number

2A37C223/90RB-6
D-3290

D-7587

TR-783
TR-745

D-20309-31

Specifications

Propeller Part Number
Number of Blades
Blade Design
Installed Propeller & Spinner Weight
Maximum Diameter
Minimum Diameter
TBO

Shipping Weight
Carton Dimensions
Spinner Carton Dimensions/Weight

P2235197-51
2
Square
64 lbs. ea. (approx.)
84 in.
82 in.
2400 hours or 72 calendar months
(whichever occurs first)
110 lbs. ea. (approx.)
93" X 11" X 21"
17" X 17" X 23"/9 lbs.

Note 1: PL60299 and PL60309 required on aircraft with Hartzell counterweighted propellers will require the installation of a "pressure to increase" type governor. McCauley governor C290D3/T35 is included in those kits requiring this installation.

Note 2: Certain early model Beechcraft Bonanza and Debonair aircraft with Beech or Flottorp propellers installed will require verification that the proper oil transfer tube adapter is installed. Please refer to Beechcraft Service instruction number 0625-248 for specific details. Required oil transfer tube available from McCauley under P/N MPS627030. Call for details.

Replaces

Flottorp F12A-4/8400-0
Flottorp F12A-5/8400-0

Hartzell BHC-92ZF-1D1/8447
Hartzell PHC-A3VF-4/V8433-(2R,4R)

McCauley 2A36C23/84B-0(2)
McCauley 3A32C76(U)/82NB-2

Performance

Performance increases vary depending on individual aircraft and flight conditions.
Call the McCauley Sales and Marketing Department for further information at 1-800-621-PROP (7767)

McCauley Propeller Systems is committed to designing, manufacturing, and delivering the finest propeller systems in the world. Introduced in 1989, the BLACKMAC line was the first mass production high performance propeller STC offered to the aviation industry. Pioneering the advancement of scimitar blade designs, solid one piece hubs, and internal steel split ring blade retention systems, McCauley has been setting the industry standards for new propeller designs for over 60 years.

We at McCauley are very proud of the engineering and performance achievements we have reached with our line of piston & turbine propellers, and you will be too. The following are just some of the reasons McCauley propellers are the finest in the world:

Improved take-off and climb performance
-Shorter take-off and landing distances and better climb.

Quieter fly over and cabin noise levels
-Significant noise reductions when installing three blade propellers vs. two blade propellers and when installing four blade propellers vs. three blade propellers
-Most STC kits enjoy further noise reduction using the new generation scimitar blade design

Propeller design from original equipment manufacturer
-Replace your propeller with an STC designed and tested by McCauley Propeller Systems

Forged, single piece aluminum hub
-A superior engineering design over two piece hubs with external clamps that require numerous fasteners which are prone to service difficulties and Airworthiness Directives

Scimitar blade designs
-A new generation of airfoil and scimitar blade designs which deliver the best performance and lowest noise levels available

Internal threadless blade retention system
-Designed with innovative engineering. Steel split retainers installed inside the hub provide a superior blade retention system

Sealed hub design
-New generation of oil filled hubs for piston aircraft which provide constant lubrication and corrosion protection.
-A design derived from our turbine propeller line which enjoys over twenty years of service excellence
-No annual servicing required beyond normal propeller care

Longest TBO available
-Piston applications up to 2400 hours or 72 calendar months (whichever occurs first)
-Turbine applications up to 6000 hours or 72 calendar months (whichever occurs first)

Industry leading warranty
-Standard three year warranty on McCauley owned STC kits extended to include McCauley supplied replacement parts for components found unserviceable due to manufacturing defects at first recommended overhaul

Industry leading customer support
-Toll free number connects you with technical support
-Worldwide network of factory authorized service centers and parts distributors
-24 hour 7 day a week AOG service

Beechcraft Bonanza &Debonair (w / IO-470)